New Zealand

Free phone 0508 727 223

Australia

Free phone 1800 456 736

Designed for New Zealand and Australia

Wireless Gate Alarms

® Standard | Single Zone

Product Highlights
  • Monitors one zone (eg: one entrance-way)
  • 800m Range (300 – 400m typical)
  • Perfect for rural and commercial installations
  • 3 Year Warranty, including Batteries

Price Australia $486.00 (AUD)
Price New Zealand $699.00 Inc GST

(see pricing notes below)






® Standard | Two Zone

Product Highlights
  • Monitors two zones (eg: two entrance-ways)
  • 800m Range (300 – 400m typical)
  • Perfect for rural and commercial installations
  • 3 Year Warranty, including Batteries

Price Australia $799.00 (AUD)
Price New Zealand $1149.00 Inc GST

(see pricing notes below)






Basic Overview

® Standard is a high performance wireless gate alarm that sounds an alert in your home whenever a visitor drives or walks through its detection beam. It uses a proper photo-electric beam, making it more immune to false alarms than PIR based systems. Never miss a customer or intruder again.

® is hand assembled in New Zealand and designed to operate in sub-zero temperatures as reliably as the penetrating heat of the Australian outback.

The beam-set may be installed as a home ‘driveway alarm’ or across wider areas, protecting fuel storage tanks and implement sheds for example.

The detection beam itself can span up to 40m of open ground. Wireless operating range between the Beam-set and Base Receiver is typically between 300-500m. Range is affected by obstacles, and can extend as far as 1km in perfect conditions, or be limited to 200m if the site is challenging.

See our ® Extended if you require our best range gate alarm, or the ® Lite if you require a residential gate alarm.

Two-way Radio Supervision and On-board Diagnostics (displayed on Base Receiver) are features alarm installers routinely expect on wireless equipment – we haven’t seen these appear on any other gate alarm yet.

® Standard is compatible with our Pocket Beeper*, POCSAG Pager*, Text Message Module* and easily interfaces with Alarm Panels.

(* optional extras, sold separately).

This kit includes:
  • 1 700-FSK Two-zone Receiver
  • 700-FSK Beam-set(s)
  • A Solar Panel for each Beam Unit
  • A 3.6v Rechargeable Battery pack for each Beam Unit
  • 12V Power Adaptor for each Base Receiver
  • Mounting Brackets for Beam-sets and solar panels
Detailed Overview
Base Receiver

The ® 700-FSK Two-zone Receiver sounds an alarm whenever any enrolled beam-set beam is interrupted. The sound of the alarm differs depending on whether the activated Beam-set is assigned to Zone 1 or Zone 2.

The Two-zone Receiver has a fixed volume control. Other devices (or an alarm panel) interface with the Base Receiver via terminal blocks located on the back of the enclosure. Located next to these terminal blocks is a Beam-set battery connector. In the event a battery from the Beam-set needs to be re-charged quickly, it can be plugged into this battery connector.

The Two-zone Receiver comes with its own antenna and is powered with a supplied 12V Power Adaptor.

Beam-set

The ® 700-FSK Beam-set is designed to monitor driveways or open ground with its precise invisible infra-red beam.

The beam-set is made up of two small Beam Units, installed directly opposite each other. An infra-red beam is transmitted from one and received by the other. Whenever the beam is broken, one Beam Unit sends an RF signal to the Base Receiver, alerting to the arrival of a person or vehicle.

The Beam-set is powered by internal rechargeable batteries which are kept charged via small mountable solar panels.

Solar Panels

Each Beam-set comes with two solar panels. These solar panels are designed to keep the Beam-set batteries charged, even in year-round overcast conditions.

Our solar panels have been treated specifically to withstand salt spray and harsh UV rays which New Zealand experiences due to the depletion of the ozone layer.

Specifications
Base Receiver
Two-way Radio Supervision YES
On-board Diagnostics YES
Maximum Number Of Supported Beam-Sets 2
Volume Adjustment Increments NONE – Fixed Volume
Power Requirements 12V DC
Dimensions – Millimetres W65 | D100 | H30
Warranty 3 Years
Beam Set
Type of Beam Active Photo-electric Infra-red
Maximum Beam Width – Metres 40
Maximum Operating Range between Beam-set and Base Receiver 800m
Modulation Type Frequency Shift Keying (FSK)
Radio Frequency 458MHz Band (Country Specific)
Average Power Consumption per Beam Unit 10mW
Battery Voltage 3.6V (charges to 4.2V approx.)
Weather Resistance
  • Poly-Carbonate, IP66 rated Enclosure
  • Fully weather-proof
  • Ant-proof
Dimensions – Millimetres W48 | D45 | H60
Warranty 3 Years
Solar Panels
Voltage Output 7.0Voc @ 700mW
Dimensions – Millimetres W120 | D60
Warranty 3 Years


Pricing Notes

  Australian Pricing

  • Paypal:   Our Paypal system is based on the New Zealand Dollar, therefore the final cost in AUD will vary slightly with the exchange rate. If you need an accurate figure, subtract 15% GST from the NZD price, then visit www.nzforex.co.nz and convert this to AUD.
  • Credit card:   When paying by credit card, we convert the AUD price (shown above) to NZ dollars at the time your card is processed, therefore the amount you are charged will be as accurate as possible.
  • GST:   There is no New Zealand GST incurred on overseas orders.

  New Zealand Pricing

  • Paypal:   When ordering through Paypal, GST is added when NZ delivery address entered.
  • GST:   The apparent significant difference between Australia and NZ pricing is due to the high value of the Australian dollar combined with NZ sales incurring 15% GST.
  • Funds Transfer via internet banking:   Please credit our Westpac account:   03-0626-0644377-00 and email us with your contact and delivery details.
  • Farmlands & CRT Card Holders:   Get your 5% discount by calling us directly on 0508 727 223.
To top