Free phone 0508 727 223
Free phone 1800 456 736
Parabeam® Lite is a high performance wireless gate alarm that sounds an alert in your home whenever a visitor drives or walks through its detection beam. It uses a proper photo-electric beam, making it more immune to false alarms than PIR based systems. Never miss a customer or intruder again.
Parabeam® is hand assembled in New Zealand and designed to operate in sub-zero temperatures as reliably as the penetrating heat of the Australian outback.
The beam-set may be installed as a home ‘driveway alarm’ or across wider areas, protecting fuel storage tanks and implement sheds for example.
The detection beam itself can span up to 40m of open ground. Wireless operating range between the Beam-set and Base Receiver is typically between 50-80m.
Two-way Radio Supervision and On-board Diagnostics (displayed on Base Receiver) are features alarm installers routinely expect on wireless equipment – we haven’t seen these appear on any other gate alarm yet.
Parabeam® Lite is compatible with our Pocket Beeper*, POCSAG Pager*, Text Message Module* and easily interfaces with Alarm Panels.
(* optional extras, sold separately).
The Parabeam® 700-FSK Two-zone Receiver sounds an alarm whenever any enrolled beam-set beam is interrupted. The sound of the alarm differs, depending on whether the activated Beam-set is assigned to Zone 1 or Zone 2.
The Two-zone Receiver has a fixed volume control. Other devices (or an alarm panel) interface with the Base Receiver via terminal blocks located on the back of the enclosure. Located next to these terminal blocks is a Beam-set battery connector. In the event a battery from the Beam-set needs to be re-charged quickly, it can be plugged into this battery connector.
The Two-zone Receiver comes with its own antenna and is powered with a supplied 12V AC adaptor.
The Parabeam® 700-FSK Lite Beam-set is designed to monitor driveways or open ground with its precise invisible infra-red beam.
The beam-set is made up of two small Beam Units, installed directly opposite each other. An infra-red beam is transmitted from one and received by the other. Whenever the beam is broken, one Beam Unit sends an RF signal to the Base Receiver, alerting to the arrival of a person or vehicle.
The Beam-set is powered by internal rechargeable batteries which are kept charged via small mountable solar panels.
Each Beam-set comes with two solar panels. These solar panels are designed to keep the Beam-set batteries charged.
Our solar panels have been treated, specifically, to withstand salt spray and harsh UV rays which New Zealand experiences due to the depletion of the ozone layer.
|Two-way Radio Supervision||YES|
|Maximum Number Of Supported Beam-Sets||2|
|Volume Adjustment Increments||NONE – Fixed Volume|
|Power Requirements||12V DC|
|Dimensions – Millimetres||W65 | D100 | H30|
|Type of Beam||Active Photo-electric Infra-red|
|Maximum Beam Width – Metres||40|
|Maximum Operating Range between Lite Beam-set and Base Receiver||50m|
|Modulation Type||Frequency Shift Keying (FSK)|
|Radio Frequency||458MHz Band (Country Specific)|
|Battery Voltage||3.6V (charges to 4.2V approx.)|
|Dimensions – Millimetres||W48 | D45 | H60|
|Dimensions – Millimetres||W120 | D60|